Magnum Firmware

Magnum Firmware V17

Important: VERSION 17 FIRMWARE MUST USE VERSION 17 CONFIGURATION FILES.
It will NOT work with configuration files designed for Magnum firmware versions 14 and lower. Also, you MUST always use the latest MCS-Connect and MCS-Config programs.

MAGSOFT (VERSION HVAC 17.95R)

Please Note: This file contains the latest official version 17 firmware release for the Magnum for HVAC applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

MAGSOFT (VERSION HAVC 17.95R) 2,552 KB

MAGSOFT (VERSION CENT 17.95R)

Please Note: This file contains the latest official version 17 firmware release for the Magnum for centrifugal applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

MAGSOFT (VERSION CENT 17.95R) 2,164 KB

MAGSOFT (VERSION REFR 17.95R)

Please Note: This file contains the latest official version 17 firmware release for the Magnum for hot gas defrost applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

MAGSOFT (VERSION REFR 17.95R) 2,085 KB

MAGSOFT (VERSION RTU 17.95R)

Please Note: This file contains the latest official version 17 firmware release for the Magnum for RTU applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

MAGSOFT (VERSION RTU 17.95R) 2,396 KB

MAGSOFT (VERSION CPM 17.95R)

Please Note: This file contains the latest official version 17 firmware release for the Magnum for CPM applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

MAGSOFT (VERSION CPM 17.95R) 1,650 KB

ARCHIVED FIRMWARE RELEASE NOTES